How to install and configure gnubox

this tutorial how to get free internet connection on you mobile using bluetooth.

Step1 Qualified Bluetooth support in yours kernel. If you have a version of the kernel previous to the 2.4.21 you must unload the patch from http://www.holtmann.org/linux/kernel. Subsequently gone in saying of yours kernel and applied the patch. You start hour the config of kernel and qualified the Bluetooth support as it follows:

Bluetooth subsystem support (m)
L2CAP protocol support (m)
SCO links support (m)
RFCOMM protocol support (m)
RFCOMM TTU SUPPORT (Y)

Then, if you have integrated a Bluetooth card, gone in Bluetooth Device Drivers and selected your adapter.
Subsequently ricompilate the kernel.

Step2 Unloaded from situated http://www.bluez.org the following packages: bluez-utils, bluez-libs, bluez-sdp, to bluez-firmware, bluez-hcidump, bluez-hciemu.
You decompress, compiled and installed all.

Step3 Hour under way “sdpd” and “hcid”, without arguments. Now, if dates the commando hciconfig you would have to see that the interface hci0 up with is assigned the address of the peripheral Bluetooth. Tried to give the commando “hcitool scan”, would have to find your cellular one (if the bluetooth it is activated obviously).

Step4 How to edit /etc/bluetooth/pin with your PIN.

Step5 Edit using: sudo kate /etc/ppp/peers/dun as it follows:
- - Start---
lock
460800
noauth
crtscts
y.y.y.y: x.x.x.x
ms-DNS w.w.w.w
- - Stop---

in place of y.y.y.y you must put the local IP while x.x.x.x the remote IP that will come assigned the cellular one.
ms-DNS the address of the DNS…
If you want you can make that your telephone can specify which IP address to have and which DNS to use (Impostazioni->Punti di Accesso->Bt->Impost. been left over)… if Problems gone to deep page in the regarding section “find to you and as to resolve them” there is a part that explains like setting up the DNS.

Step6 You must qualify the IP Forwarding. tried on google

Step7 Under way ones dund as it follows: dund - listen call dun

Step8 You start hcidump, in this way you will be able to sniffare completely every transmission between cell and the PC (useful when you will try gnubox, in order to see if etc is connected correctly…)

Step9 You slide the page in order to pass to the installation and the configuration of GnuBox on the cellular one.